• Server cleaning in operations

    Server cleaning in operations

    Avoid server failure by professional cleaning

  • Server cleaning from construction dust

    Goodbye dust!

    You can always count on the expertise of experts!

  • Downtime server cleaning

    Downtime server cleaning

    The purge with the highest purification efficiency

  • Server cleaning from construction dust

    post constructions server cleaning

    Safely remove Construction dust contamination

  • Downtime Server cleaning

    Trust us in all things server cleaning!

    Ping T&S: Your Expert for Server cleaning

  • Server cleaning services

    Made in Germany. We will take the responsibility for the cleaning of your server!

Call Back



The purge with the highest purification efficiency

Downtime Server cleaningThe server cleaning with controlled downtime is the right choice if you want to completely clean your IT-server. Unlike other purification methods, all the hardware removed and the servers are not operational during this time, however.

The advantage of server cleaning with controlled downtime is the fact that the interval to the next cleaning is considerably higher than the normal cleaning operation. While cleaning should normally be done every 4 - 9 months, server cleaning with controlled downtime only needs to be done every 12 - 18 months.

What is the processing server cleaning ?

On-site inspection in the presence of your IT-representative of the EDP-rooms and the existing hardware, as well as a subsequent status analysis. Power supplies, fans, drives, and other components are not only cleaned using a special vacuum cleaners but also dirt and fine particulate matter.

The dirt particles are removed with an air gun with the rotary screen, intercepted and thus permanently removed from your computer rooms. The active components are cleaned with special tools according to the manufacturer's instructions. The detergent used is of course allowed for cleaning and TUV-approved. For older parts that are not functioning properly, we use a Kontakt-Reiniger , restoring the optimal functionality of the hardware.

Server cleaning with Downtime

After cleaning: start-up and new Get Started!

After cleaning, your server is reassembled, antistatic sealed and cabled. Before we go, the functionality of your server, along with your IT-representative is reviewed and documented after the start-up.

The server cleaning with controlled downtime: a good investment for your server!

 TAGS:

 

Server cleaning after constructions

Server cleaning from dust

If your company has experienced construction in the direct vicinity of the server, a server cleaning is strongly recommended. Due to construction, dust and dirt particles come in contact with your server hardware, which can lead to serious system failures. With a server cleaning from construction dust we bring your IT back on track.

Why is the trackwork is protected against so dangerous?

Even a small amount of dust can in conjunction with the ambient humidity cause conductive deposits and permanently affect the functionality of your hardware. Hardware failures are therefore pre-programmed.

Best preparation for professional results

We beginn our server cleaning services from construction dust by performing a site visit and a status analysis with local IT personnel. Your EDP-spaces and the existing hardware will be visually examined and a functional test of the hardware components will be documented and logged. Then, the hardware by the IT-representative shut down and opened.

Safely remove Construction dust contamination

We begin immediately with the professional cleaning of power supplies, fans, drives, and other relevant system components. Our ESD special vacuum cleaners allow us to remove coarse dirt and dust. The active components are cleaned with special tools according to the manufacturer regulations, EC guidelines and ESD guidelines. The detergent used is of course TUV-tested, and we have a Kontakt-Reiniger for older parts, for the optimal functionality of the hardware.

After the inside cleaning, the server and the server enclosure is assembled with Spezial-Reiniger cleaned, antistatic sealed, cabled and powered up.

With us, there is no "Rude Awakening"

Before we go, we together with your IT-representative check the functionality of your server, and document the results. You can rely on our server cleaning!

TAGS:

Our services for your servers at a glance

The cleaning of complex server rooms is no obstacle to us, but a challenge which we are pleased to face. Our years of expertise enable us to offer you a wide range of industrial cleaning services. Industrial cleaning services offered: our range of services includes servers dust cleaning, during operation cleaning and server cleaning with controlled downtime. Take a look at our service offerings!

Server cleaning from construction dust

Dust contamination during construction cannot be avoided, but may cause increasing hardware failures. It is therefore advisable to clean power supplies, fans, drives, and other components professionally, if a construction company was working near them. A server dust cleaning ensures the functionality and service life of your server and prevents unpleasant system failures.

Server cleaning in ongoing operation

The in operation server cleaning has the advantage that your hardware is not shut down and the operation can be continued. We are using special ESD vacuum cleaners for the cleaning of contamination by contruction dust, as a blockage of the cooling vents and other safety-related hardware components such as power supplies and CPU coolers.

Downtime Server cleaning

A Downtime Server cleaning Procedere after the removal of the components is the most efficient way of server cleaning. Your server will be completely removed from the rack, opened and cleaned inside. Downtime Server cleaning is recommended with regular intervals of 12 - 18 months

You want to clean your server without the use being affected? We can also offer you this.

Server cleaning during operation: Advantages and Disadvantages

Server cleaning during operation

A great advantage of this cleaning process is complete, the 100% availability of all servers during the cleaning. For large firms, servers must be always be ready for use, this type of cleaning is often the only option. With our server cleaning during ongoing operation, you ensuring that your server is powerful even in continuing operation.

Increased temperature by dust = more server failure

If servers are in constant use, this automatically increases the operating temperature - this increases even more if the air pockets in your servers are blocked by dirt, as servers will consume more energy and heat up in addition.

The adjacent graph from the Los Alamos National Laboratory Los Alamos National Laboratory shows quite clearly that the number of server failure due to increased operating temperatures growing exponentially. With a server cleaning during on-going operation, you can prevent this type of server failure.

Avoid server failure by professional cleaning

Ping T&S specialize in cleaning your server even while it's running and would be happy to advise you to the end of the server cleaning. We use special vacuum cleaner that is recommended to clean, anti-static special cleaning fluid and TUV approved cleaning agent and thus provide a server cleaning at the highest level.

In order not to interrupt operation, we continue our cleaning if necessary on Sundays, public holidays or at night, and also offer you short-term service containing spills in case of emergency clean up.

You can always count on the expertise of experts!

 

Quelle: Los Alamos National Laboratory

Hotlines

Berlin: (030) 303.404.77

Frankfurt: (069) 96.75.86.11

München: (089) 210.94.320

Hamburg: (040) 87.40.90.30

insured

3mio grau klein